Home > INSTEON >

I3 Paddle
I3 Paddle


 
Alternative Views:
Precio al publico en dolares: $75.09


MODELO: PS01
Cantidad:

Descripción Ficha Técnica
 
El i3 Paddle es todo lo que necesita en un solo equipo ya que puede configurarse como un interruptor de encendido/apagado o como un interruptor de atenuación con un diseño completamente nuevo y limpio.
  • El diseño familiar funciona como un interruptor estándar; la parte superior enciende la luz y la parte inferior la apaga: en el modo de atenuación, presione y mantenga presionada la parte superior para iluminar, presione y mantenga presionada la parte inferior para atenuar.
  • Se puede configurar para control de encendido/apagado o atenuación para compatibilidad con varios dispositivos
  • Modo de encendido/apagado: admite conmutación de hasta 9A, 1/3 HP: excelente para iluminación no regulable o ventiladores de techo y extractores
  • El modo de atenuación admite hasta 150 W para bombillas LED regulables o hasta 400 W para bombillas incandescentes o halógenas
  • Controle un dispositivo o una habitación completa desde un solo interruptor; se empareja con otros productos Insteon para circuitos de interruptores múltiples, con o sin Hub
  • Puede ser usado como apagador de escalera de 3 vias.

Simple e intuitivo
El i3 Paddle está diseñado para todos en su hogar, eliminando las conjeturas al preparar la escena o crear el estado de ánimo perfecto.

Inteligentemente confiable

Con la tecnología patentada de doble malla, incluso si su Wi-Fi no funciona, sus interruptores seguirán funcionando.

Elegancia discreta

El i3 Paddle es elegante y discreto para combinar con cualquier decoración.

Compatibilidad

Los dispositivos i3 usan la misma tecnología Insteon de doble malla única que usan otros productos Insteon. Esto significa que, desde el primer momento, puede vincular manualmente los dispositivos i3 a prácticamente cualquier dispositivo Insteon. Además, muchas de las configuraciones locales se pueden configurar de manera similar.

Los dispositivos i3 son compatibles con Insteon Hub 2 y la aplicación Director. Si utiliza hardware/software de terceros (eisy, Indigo, Homeseer, etc.), las funciones pueden ser limitadas, ya que trabajamos con esos socios desarrolladores para admitir estos nuevos dispositivos.



hero-feature-remote-control.png

Remote Control

This is no ordinary wall switch. Insteon Wall Switches can be remotely controlled from almost any device in your home: Sensors monitoring doors, windows, leaks and more, remotes, keypads and other wall switches throughout your home, even your smartphone when used with the Insteon Hub.

hero-features-dimming-or-switch.png

On/Off or Dimming

Whether you need the raw switching power of our 1,800W-relay-based On/Off Switch or the gentle dimming grace of our traditional Dimmer Switch, there's an Insteon Wall Switch to fit your switching needs.

hero-feature-scenes.png

Scenes+

One of the most powerful features of Insteon switches, Scenes let you control multiple devices simultaneously with a single tap. Brighten all of the lights in an entire room with a tap-and-hold or create infinite virtual multi-wa
y switches.

hero-feature-customizable.png

Customizable

Adjustable ramp speeds and on-levels can be configured for dimmers while LED indicators for all Insteon wall switches can be adjusted so that they don't shine too bright at night. Switches can also be linked to one another, making it possible to create virtual 3-way circuits wherever you want.
Caracteristicas

  • Getting Started

    1. Status LED

    2. Set button (press), air gap (pull)

    3. On or hold to brighten*

    4. Off or hold to dim*

    5. Device ID

    *When in dimmer mode - learn more

    Note: We’ve been alerted that some customers may receive a switch with the incorrect unit label applied resulting in mislabeled wires on the back. Please install by wire color, not label:

    Black = Line
  • Red = Load
  • White = Neutral
  • Green = Ground

    Tools needed

    • Phillips screwdriver

    • Flathead screwdriver

    • Voltage detector

    • Wire cutter / stripper

    Are you installing a single switch?

    This guide covers a single switch controlling a fixture. If you are installing as part of a multi-way circuit (2 or more switches controlling the same fixtures).

    Step 1. Turn off power

    Remove power to your switch by turning off the appropriate circuit breaker at the electrical service panel. Confirm power is turned off by flipping the existing wall switch on and off.

    Step 2. Remove old switch

    Unscrew and pull the old switch away from the wall. Look in the wall box for neutral wires. These are usually 2 or more white wires connected with a wire nut. If you do not have these or are unsure, stop and contact support.

    Disconnect the wires and make sure to straighten the ends and have about 1/2” length of exposed wire.

    Step 3. Turn on power

    Turn on power at the circuit breaker and use a voltage detector to identify which exposed wire has voltage. This will be considered the line wire. The wire without voltage will be the load wire.

    Step 4. Turn off power & connect wires

    Turn off power at the circuit breaker. Connect the Paddle wires to the identified wires in the junction box.

    Verify that the wire nuts are secure and that no exposed copper wire is visible except for the bare ground wire.

    Step 5. Install and turn on power

    Install the Paddle into the junction box with the status LED on the left. Turn on power at the circuit breaker.

    Step 6. Test

    Tap the paddle top and bottom to turn on and off the connected light.

    If the fixture is not dimmable change the Paddle to on/off mode (see the end of this guide).

    Step 7. Link to Insteon Hub 2

    In the Insteon Director app, follow the on-screen instructions to pair your Paddle to the Insteon Hub 2.

    Insteon Hub 2 enables control from your smart phone and voice assistant.

    Enjoy your new Dial

    Adjust settings, set schedules and create scenes for your Paddle using the Insteon Hub 2 and Director app.

    Manually change between dimmer and on/off modes

    Out of the box, your Paddle is set to on/off mode. If it’s wired to a dimmable bulb or fixture, follow the instructions here:

    1. Pull out the set button to engage - the air gap (status LED will turn off)

    2. For dimmer mode: press and hold the top of the paddle
      For on/off mode: press and hold the bottom of the paddle

    3. While pressing the paddle, push the set button back in place

    4. Continue pressing the paddle until the status LED turns blue and the device beeps once (dimmer mode) or beeps twice (on/off mode)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Sorprendido June 5, 2023
Reviewer: Carlos Petrones from Merida  
Me gusto el diseño, construccion robusta, etsandar alto de calidad y le doy un 10 por la opcion dimmer o relay en un mismo equipo.

Was this review helpful to you?